NEW! National Chemicals Non-Toxic Vantage Synergy Draft Beer Line System Cleaner

National Chemicals has incorporated both safety and efficiency into their new Synergy Power User Blend beer line cleaning solution. When you combine all three of their Vantage Synergy products (Biomass Remover, Demineralizer, and Accelerator) you get a mixture that reduces cleaning time by up to 50% and is non-caustic, non-corrosive and non-hazardous!

The easy-to-understand instructions make this solution accessible to owners/operators while improving personal and consumer safety.

How Does This Compare to Other "Green" Beer Line Cleaners?

One of the main benefits of this blend compared to other "green" cleaners is that it doesn't have to be recirculated. You also don't have to flush the lines in-between the different cleaners. Just run them all together!

While you will still want to complete a general system flush after use, you don't have to worry about leftover product in your lines. It won't taint the taste of your beer or harm your customers.

When you are done using the Synergy Power User Blend, you can just pour it down the drain! No complicated disposal process required.

Save Money on Shipping Expenses

This product has a triple zero health and safety rating, which means no Hazardous Materials Safety Permit (HMSP) is required to ship it! If you are a distributor that regularly ships beer liner cleaner to your branches, this will definitely save you money.

Instructions for Use

For use with CO2 pots and recirculating pumps. Extreme or long-standing soil loads may require more chemistry, contact time, flow rate and/or temperature.

1. Fill cleaning container with water.
2. Add 2 oz. Vantage Synergy Biomass Remover per gallon of water.
3. Add 2 oz. Vantage Synergy Demineralizer per gallon of water.
4. Add 2 oz. Vantage Synergy Accelerator per gallon of water.
5. Load system with cleaning solution and drain out beverage.
6. Recirculate for 10 minutes.
7. Flush cleaning solution from lines and rinse with clean water.
8. Load system with beverage and drain out rinse water until beverage appears.
9. Draw beverage and test for quality and clarity.

Note: This solution can also work on systems that dispense wine, kombucha, coffee, etc.

Customer Insights

The Rapids team had an opportunity to speak with a beer line cleaner from Tennessee named David N. who has actually been using Vantage in the field. David's experience with Vantage has been overwhelming positive, and he has a number of new selling points he can use with his line cleaning customers:

• This product cuts up to 30 minutes off of cleaning times.
• This reduction in cleaning time allows David to give customers a cleaning that is on par with a quarterly cleaning every time, and customers are willing to pay extra! This is especially important for customers that serve craft beers, as craft beer lines are more likely to have beer stones and yeast, which a quarterly cleaning can better handle.
• He can service 15 accounts with 100 ft lines on just two bottles!
• Because it is non-caustic and non-hazardous, he doesn't need to worry about customer contact or about the caustic/acid burp when switching from cleaner to water use. He also doesn't have to be as thorough cleaning the couplers and faucets.
• It's given him an opening with "green" customers who care about the environment.

If you try this product and have feedback, let us know! Your insights could end up on this blog!