69" 3-Keg Draft Beer Dispenser with Three Taps and Black Vinyl Exterior | Beverage Air DD68HC-1-B
Make the most of your keg cooler by choosing this 3-keg 3-tap kegerator from Beverage Air. The 28.4 cu.ft. beer dispenser comes with one single and one dual 3" faucet tower, which means you can hook up all three kegs to their own tap, eliminating wasted space. The exterior is made from easy-to-clean black vinyl and the interior has galvanized steel walls/ceiling with reinforced floors and door sills. FYI: Keg capacities are based on straight wall kegs.
Features of the Beverage Air DD68HC-1-B Black Vinyl Direct Draw Beer Cooler
Environmentally-friendly foamed-in-place CFC and HCFC-free polyurethane and R290 hydrocarbon refrigerant decrease the amount of money you will have to spend for energy costs
Forced air refrigeration and a continuous supply of cold air in the tap towers keeps beer ice cold from keg to pour
100 degrees Fahrenheit ambient class-certified ensures suitability for hot locations
Self-closing doors and stainless steel top
Cooler has a drain tube that can easily be connected to the floor drain
Includes an 8' long cord and plug set
Ships from IA, PA.
Comprehensive Beverage Air DD68HC-1-B Beer Dispenser Warranty
Parts and Labor: Three Years
Compressor: Five Years
Rapids Beer Tips
To ensure your Beer Dispenser is ready to go right out of the box, Rapids suggests you purchase either a
Deluxe Tapping Kit (containing a CO2 kit, a cleaning kit, and a tapping kit), OR a simple CO2 Kit, depending on your needs. Need More Beer?
To dispense even more than the factory-default number of beers at one time, you will need a few other items as well:
Extra CO2 hose (4 ft per each new keg is recommended) and 2 clamps for each new hose
Beer line, hex nuts, and washers to attach your keg to the dispenser
Additional coupler so you can hook up your CO2 line and beer line to the keg completes the setup.
To add an additional faucet to your existing draft arms:
Depending on whether you want to add one offset, one inline, or two additional products, different kits are required. Each kit contains a sleeve, insulation, 3 set screws, and shank(s)
For each product you are adding, a faucet will be needed
The coupler, CO2 hose, clamps, etc. will be required here as well, as you are still adding additional kegs.
Beverage Air beer dispensers/kegerators or check out all brands of beer dispensers/kegerators. Beverage Air DD Series Direct Draw Beer Dispenser Features Video