59" 3-Keg 3-Tap Beer Dispenser, Stainless | Beverage Air DD58HC-1-S

$4,615.75
SKU
6B303

59" 3-Keg 3-Tap Kegerator w/ 1 Single and 1 Dual Faucet | Stainless Steel | Beverage Air DD58HC-1-S

When you choose this 3-keg/tap beer dispenser from Beverage Air, you will be choosing a product that combines easy beer dispensing with a classic stainless steel exterior. Ships from IA, PA.

Dimensions: 59"W x 29"D x 52-1/2"H, 376 lbs

Find more Beverage Air beer dispensers/kegerators or check out all brands of beer dispensers/kegerators.

Beverage Air DD58HC-1-S Stainless 59" 3-Keg 3-Tap Kegerator

Keep your beers ice cold from keg to glass with this beer dispenser that can handle hot locations (tested and certified to ambient class of 100 degrees Fahrenheit). Includes one single and one dual faucet. Get it from Rapids Wholesale today, supplier of bars and restaurants since 1936.

Advantageous Features of the Beverage Air DD58HC-1-S Stainless Keg Cooler

  • 3-in-1 Draft Solution uses a single stainless-steel tap to serve different beverages, such as wine, beer, and coffee (or other non-alcoholic beverages) through silver-lined tubing that is 100% effective against the top 4 beverage spoiling bacteria
  • Magnetic gaskets create tight, positive door seal
  • Self-closing doors with key locks
  • Balanced refrigeration system maintains cold keg temperatures
  • 3" diameter insulated dispensing columns have cold air channeled through so beer will be maintained at proper temperature
  • Environmentally-friendly R290 hydrocarbon refrigerant
  • Foamed-in-place CFC and HCFC-free polyurethane insulation
  • Galvanized steel interior with reinforced floor and door sills to provide long-lasting service
  • Stainless steel front and top
  • 1/4 HP, 2.5 amps, 115V
  • Warranties: 3 years parts and labor, 7 years compressor

Rapids Beer Tips

To ensure your Beer Dispenser is ready to go right out of the box, Rapids suggests you purchase either a Deluxe Tapping Kit (containing a CO2 kit, a cleaning kit, and a tapping kit), OR a simple CO2 Kit, depending on your needs.

Need More Beer?

To dispense even more than the factory-default number of beers at one time, you will need a few other items as well:

  • Extra CO2 hose (4 ft per each new keg is recommended) and 2 clamps for each new hose
  • Beer line, hex nuts, and washers to attach your keg to the dispenser
  • Additional coupler so you can hook up your CO2 line and beer line to the keg completes the setup.

To add an additional faucet to your existing draft arms:

  • Depending on whether you want to add one offset, one inline, or two additional products, different kits are required. Each kit contains a sleeve, insulation, 3 set screws, and shank(s)
  • For each product you are adding, a faucet will be needed
  • The coupler, CO2 hose, clamps, etc. will be required here as well, as you are still adding additional kegs.
More Information
Beer Dispenser Regular Top
Number of Doors 2
Exterior Stainless Steel
Energy Star No
Manufacturer Beverage Air
MPN DD58HC-1-S
SKU 6B303
WARNING California Prop 65
This product can expose you to chemicals including Lead & Lead Compounds, which are known to the State of California to causecancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Write Your Own Review
You're reviewing:59" 3-Keg 3-Tap Beer Dispenser, Stainless | Beverage Air DD58HC-1-S
Your Rating

Related products

Check items to add to the cart or

You may also be interested in...