Vollrath 74701DW Mirage Drop-In Induction Warmer, 7 quart
Vollrath 74701DW 7-Quart Mirage Drop-In Induction Warmer
Product Features:
- 7 qt. drop-in, dry operation / 250W (holding), 120V, 2.1A, NEMA 5-15P
- 3D induction coil — even heating across full inset base
- 3-location stir sensing, Stir Light indicator
- 4 presets / locking controls / 190°F temperature limit
- °F and °C temperature control
- Includes 7 qt. inset and hinged cover (interchangeable with 74701D)
- Cabinet-mount controls, 58" control cord, mounting hardware
- NSF4 certified / cULus, NSF, FCC (cover not NSF listed)
The Vollrath Mirage 7 qt. drop-in induction warmer is the holding-mode complement to the 800W rethermalizer — at 250W, it's calibrated for maintaining already-hot soups, stews, and sauces at safe serving temperatures through an extended service period rather than heating from cold. Same dry operation, 3D coil, three-point stir sensing, four presets, and locking controls as the rethermalizer model.
Included insets are interchangeable between the 250W warmer and 800W rethermalizer, allowing operations that run both to use the same insets across units. Cabinet-mount controls with 58" cord. 250W, 120V, 2.1 amps, NEMA 5-15P. NSF4 certified. cULus, NSF, FCC.
The Vollrath Mirage 7 qt. drop-in induction warmer is the holding-optimized version of the Mirage 7 qt. drop-in system — at 250W, it provides the energy needed to maintain soups, stews, and sauces at safe serving temperatures throughout an extended service period, without the 800W heating power of the rethermalizer model needed to bring food up from refrigerated temperature.
The 250W holding specification is appropriate for the service-phase role this unit performs. Once food has been brought to temperature — by the 800W rethermalizer version or by the kitchen's cooking equipment before loading — the 250W warmer maintains that temperature with significantly lower energy consumption. For buffet operations, soup service stations, and self-serve food areas where soups and sauces hold for hours, the reduced wattage maintains the temperature without overcooking the product or excessive energy expenditure.
All functional features carry over from the 800W rethermalizer: the 3D induction coil for even bottom heating, three-point sensor stir indicator that responds to actual temperature distribution rather than a timer alone, four presets for simplified staff operation, locking function for food safety compliance, and 190°F temperature limit. The included 7 qt. inset and hinged cover are identical — in operations that run both the rethermalizer and warmer models, the insets are interchangeable, allowing pre-filled insets to move from the rethermalizer to the warmer as service progresses.
Cabinet-mount controls with 58" cord for separate panel positioning. Mounting hardware included. NSF4 certified for hot food holding. cULus, NSF, FCC.
WARNING - CA Prop 65 | Product Weight (lbs) | 12.36 |
|---|---|
| Product Width (in) | 11.87 |
| Product Depth (in) | 11 |
| Product Height (in) | 13.5 |
| Amps (A) | 2.1 |
| Voltage | 120v/60hz/1ph |
| Watts | 250 |
| Plug Type | NEMA 5-15P |
| Induction Type | Warmer |
| Control Type | Electric Thermostat |
| Standard Warranty | 1yr Parts/Labor |
| Manufacturer | Vollrath |
| MPN | 74701DW |
| SKU | 6V324 |
