Carbonating Keg Lid for Beer
Carbonating Corny Keg Lid with Diffusion Stone For Craft Beer
Corny Keg Carbonation or Nitrogenation Lid with 0.5 um diffusion stone. This corny keg carbonation lid allows you to easily carbonate your beer inside your corny keg without shaking the keg.
Note: Fits most corny-style kegs. Please pressure test with your keg for a good seal before deployment.
Carbonating Keg Lid with Diffusion Stone for Beer
The easy way to force nitrogen into your beer! Force nitrogen or carbonate your beer quickly and easily using this nitrogenation and carbonation keg lid for Corny kegs. Simply increase your pressure by 5 PSI every few minutes until you reach your desired serving pressure (normally around 35-40 PSI depending on the length and design of your system). The .5 um diffusion stone breaks up the Nitrogen or CO2, creating tiny bubbles in your beer or coffee. You will need one of these lids for each nitro keg that you have on tap. If you take the lid off your kegged beverage, it will lose it's carbonation as well as allowing contaminant inside your fresh brew. These carbonating lids will fit a 2.5 or 5 gallon Corny keg.
Carbonating Keg Lid Includes
- Lid which fits 5 gallon or 2.5 gallon Cornelius keg
- .5 micron diffusion stone
- O-ring
- 21" tubing hose
* Note: This carbonating keg lid with hose and stone attached will reach to bottom of a 5 gallon Corny keg
| Manufacturer | Rapids |
|---|---|
| MPN | A-CARBLID-0.5DS |
| SKU | 7C300-BEER |
 WARNING |
California Prop 65 Information not provided by manufacturer. Contact manufacturer for more details. |
