Rapids Deluxe Kegerator Conversion Kit │Dual Gauge Regulator

Rapids Deluxe Kegerator Conversion Kit with Dual Gauge Regulator

This Door mount kegerator conversion kit gets you everything you need to create your very own kegerator. It comes with step by step instructions on how to assemble all the parts to your fridge. In addition to the components found in Rapids Super Kegerator Kit, you receive an upgraded dual gauge regulator that will read pressure as well as the amount of CO2 left in the cylinder. And you receive a drip tray to mount under the faucet to catch rogue drops of beer to save your floor. Also included is a beer line cleaning system that will insure your system is free of beer stones, yeast and other mineral deposits. A clean system is vital for great tasting beer.

How the Deluxe Kegerator Conversion Kits Work

Once you've found a donor keg for this project, you'll use the hardware in this kit to convert it to your very own beer dispensing fridge. Make sure the fridge is large enough to hold the keg size you would like to use and still fit the CO2 cylinder inside. The cylinder can be attached outside of the fridge, but that will require drilling and sealing an additional hole in the kegerator. The next step is to drill a hole in the door in which you will fasten the beer shank. A beer faucet attaches to the shank on the outside of the fridge. On the inside of the keg fridge, a beer line is attached the shank that will connect it to the supplied keg coupler. Washers are provided to place at these connections to make sure you have a good sealed line. The keg coupler in this kit is a wing style sankey coupler which fits most domestic beers brewed and distributed in North America. Some European styles and specialty craft beers may require a different coupler setup. Rapids carries all the different styles of beer couplers used. You can find less common keg couplers in our keg coupler category. In this kit you also get a CO2 cylinder that once charged will pressurize the system. As an upgrade, you get a dual gauge regulator that will provide you information on both the amount of pressure being supplied to the system as well as how much CO2 remains in the cylinder.

Rapids Deluxe Keg Fridge Conversion Kit Components

These items are included in the kit:

One (1) 6' Beer Line Hose
Two (2) Washers (1 for each end of Beer Line Hose)
One (1) 4' CO2 Line Hose
Two (2) Fasteners (1 for each end of CO2 Line Hose)
One (1) Sankey Wing Style Keg Coupler
One (1) 5-1/8" Beer Shank
One (1) Beer Faucet
One (1) Beer Faucet Tap Handle
One (1) Dual Gauge CO2 Regulator
One (1) CO2 Cylinder
One (1) Rapids Faucet Spanner Wrench
One (1) Faucet Brush (for cleaning)
One (1) Beer Line and Parts Cleaning Jar Pump
One (1) Bottle of BLC Beer Line Cleaning Solution
One (1) Drip Pan Assembly with Fasteners
Installation Instructions
Beer Line and Parts Cleaning Instructions

Accessorizing Your DIY Keg Fridge

The Deluxe Keg Fridge Kits come packed with all the essential components to get you pouring crips clean ice cold beer. Set yours apart by adding some unique special touches. Consider one of these custom faucet tap handles to bring out your style. Keep the neighbors out by installing a faucet lock and don't forget to get the proper beer mugs and glasses for serving.