2 Faucet Draft Beer Jockey Box Cold Plate 48 Qt.
This 48 qt. cold plate jockey box is specifically designed for two-product cooling and dispensing applications. With this Rapids cold plate beer cooler, you can chill and dispense two different brands or types of beer, wine or cold brew coffee off premise without electricity.
Looking for a commercial grade cold plate jockey box that can dispense more than two brands of beer? Check out this four-faucet cold plate beer cooler.
Rapids Cold Plate Beer Cooler
Cold plate coolers available from trusted brand Rapids and sold here at Rapids Wholesale use a 10" x 15" heavy-duty, cast-aluminum cold plate for continuous flow of cold draft beer. Like most cold plate coolers, this particular unit uses a cold aluminum plate to chill your kegged beer.
This Rapids cold plate beer cooler is a red, 48-quart picnic cooler that has foamed insulation with thick inner and outer liners. This cold plate beer cooler also includes a drain plug faucets, tubing, and a beer hose that runs from the coupler to the cold plate. This pre-assembled cold plate jockey box serves up to to 180 12-oz. drinks per faucet.
Important note: around 25 to 30 pounds of applied CO2 pressure is required for this cold plate jockey box to dispense properly.
Aside from cold-plate coolers and coil coolers, we also have a wide selection of keg jackets and keg blankets here at Rapids. Check out our beverage tubs and keg blankets.
Cold Plate Jockey Box Details and Features
- A cold plate beer cooler that's already pre-assembled and ready to go
- This cold plate jockey box uses 10" x 15" heavy-duty, cast-aluminum cold plate for continuous flow of cold draft beer
- This Rapids cold plate beer cooler is a red, 48-quart picnic cooler that has foamed insulation with thick inner and outer liners
- Our cold plate coolers manufactured by Rapids already includes a drain plug and also includes faucets, and tubing.
Rapids Beer Tips
To complete the setup of your jockey box, Rapids suggests the following products (if you don't already have them): A CO2 Kit to pressurize the system so your beer will flow, two (2) Sankey Coupler Kits to attach your kegs to the cooler, and a CO2 Splitter that allows you to add more than one coupler to the jockey box (so you can set up two kegs at once).
Don't forget about cleaning your jockey box! To maintain cleanliness after use and ensure fresh-tasting beer next time, we recommend using an FDA approved flush out hose to sanitize the unit prior to storing it.
