Vollrath Wall Mounted Lid Dispenser, Stainless Steel
Vollrath LD2-2 Wall Mounted Lid Dispenser, Stainless Steel
Product Features:
- Height: 25-1/2"
- Tube diameter: 4-1/3"
- (2) lid columns
- Accommodates lids: up to 4-1/8" diameter
- Mounting brackets included
- Wall or stand mount
- Stainless steel construction
The Vollrath two-compartment stainless steel lid dispenser stores two columns of drink lids in vertical tubes mounted to a wall or stand. The 25-1/2"H dispenser accommodates lids up to 4-1/8" diameter across both tube positions. Stainless steel construction provides commercial durability and a professional appearance at beverage service stations.
Mounting brackets included for wall or stand installation. Two columns provide two lid types or higher volume of a single type at the same service point.
Wall-mounted lid dispensers remove lid storage from the counter surface entirely — mounting the lid supply at the wall or on a stand at the correct reach height for service staff, keeping the counter surface clear for cups, preparation, and service transactions. The Vollrath two-compartment stainless steel lid dispenser provides this wall or stand configuration for two columns of lids up to 4-1/8" diameter.
At 25-1/2"H, the vertical tube format stores a full column of lids per tube — a meaningful inventory depth that reduces restocking frequency at busy beverage service stations. Lids are loaded from the top of each tube and gravity-fed to the dispensing position at the bottom, where each lid is accessible for retrieval without disturbing the remaining stack. Bottom-dispensing from a gravity-fed tube is a self-presenting format: the bottom lid is always positioned for retrieval without reaching into the tube.
Two columns in the same mounting assembly provide two lid types — or a higher total capacity of a single lid type — at the same service point. For cafes and beverage operations running both hot and cold drink lid formats, the two-column stainless dispenser consolidates both at a single wall or stand location in a clean, organized installation.
Stainless steel construction is the correct material for a wall-mounted or stand-mounted beverage service accessory that will be continuously visible, regularly touched during lid retrieval and restocking, and cleaned frequently. Stainless maintains its appearance through moisture, cleaning chemicals, and physical contact without the surface degradation that coated or plastic alternatives develop over time in active commercial use.
Mounting brackets included for wall or stand installation. Wall mounting positions the dispenser at a fixed height determined by installation — plan the mounting height for the service staff who will use it, not for guest reach. Stand mounting provides flexibility to reposition the dispenser as station layouts change.
WARNING - CA Prop 65 | Dispenser Type | Lids |
|---|---|
| Installation Type | Countertop |
| Product Weight (lbs) | 3.25 |
| Manufacturer | Vollrath |
| MPN | LD2-2 |
| SKU | 4V865 |
