Vollrath Three-Column Vertical Flush-Mount T-Shaped Lid Holder, Black
Vollrath FML-3V Three-Column Vertical Flush-Mount T-Shaped Lid Holder, Black
Product Features:
- Overall dimensions: 6-1/2"W x 5-3/8"D x 19-3/8"H
- Cutout size: 18-7/16" x 5-9/16"
- (3) lid columns — vertical orientation
- For hot and cold drink lids
- Black impact-resistant molded thermoplastic
- Mar- and fingerprint-resistant
- Mounting screws included
The Vollrath three-column vertical flush-mount lid holder stores three columns of drink lids in a vertically oriented recessed installation — providing three lid types in a 6-1/2"W narrow footprint. Overall dimensions 6-1/2"W x 5-3/8"D x 19-3/8"H with an 18-7/16" x 5-9/16" cutout.
For counter and cabinet positions where horizontal width is limited but vertical height is available. Mar- and fingerprint-resistant black thermoplastic. Mounting screws included.
Three lid types in a 5-9/16" wide opening: the Vollrath three-column vertical flush-mount lid holder achieves the same three-column lid type capacity as the horizontal model while requiring less than a third of the horizontal space — 5-9/16" versus 15-1/16". The trade-off is height: the three columns stack vertically in an 18-7/16" tall cutout, requiring a counter or cabinet face with sufficient vertical panel height to accommodate the installation.
For beverage service installations where the counter or cabinet face has limited horizontal run — corner positions, narrow equipment bays, or counters with structural interruptions at short intervals — the vertical orientation makes three-column lid storage feasible where the horizontal model wouldn't fit. In those constrained horizontal positions, the vertical three-column model is the only way to provide three lid types at a single flush installation point.
Three columns stacked vertically means the lid types are positioned at three different heights — lower, middle, and upper. Service staff ergonomics favor the lower and middle positions for the highest-volume lid types, with the upper column serving a secondary or specialty lid. Station planning should allocate the column heights intentionally rather than arbitrarily, placing the most frequently reached lid at the most ergonomically natural height.
The 19-3/8"H overall unit dimension requires adequate depth behind the mounting surface — the unit body extends 5-3/8"D into the counter or cabinet structure. Cabinet face installations require the cabinet interior to be clear of equipment or structure at the installation location and depth before cutting the 18-7/16" x 5-9/16" cutout.
Mar- and fingerprint-resistant black thermoplastic construction. Mounting screws included. The three-column lid storage solution for commercial beverage service installations where horizontal space is the limiting constraint.
WARNING - CA Prop 65 | Dispenser Type | Lids |
|---|---|
| Installation Type | Flush Mount |
| Product Weight (lbs) | 3.85 |
| Product Width (in) | 6.5 |
| Product Depth (in) | 5.38 |
| Product Height (in) | 19.38 |
| Manufacturer | Vollrath |
| MPN | FML-3V |
| SKU | 4V821 |
