Krowne 30-324 Fryer Splash Guard, Universal Sizing, 1/2" Fryer Wall
Krowne Fryer Splash Guard, 1/2" Wall, 20-1/2" x 18"
Product Features:
- Dimensions: 20-1/2"D x 18"H
- 18 gauge stainless steel
- For 1/2" thick fryer wall
- Installs on left or right side
- Universal fit — fits most commercial fryers
- Reduces hot oil splatter to adjacent equipment and staff
- Easy to remove for cleaning
This universal stainless steel fryer splash guard, 20-1/2"D x 18"H, installs on the left or right side of commercial fryers with a 1/2" thick fryer wall. The 18 gauge stainless steel construction stands up to the high heat, hot oil, and aggressive cleaning of a commercial fryer station while protecting adjacent equipment from oil splatter.
Universal sizing fits most commercial floor fryers without modification. Reducing oil splatter to adjacent equipment and cooking surfaces minimizes fire risk, reduces cleaning time, and protects staff from incidental hot oil contact during busy service periods.
Fryer stations are among the highest-risk locations in a commercial kitchen — hot oil at operating temperature can cause severe burns on contact, and equipment adjacent to an active fryer is regularly exposed to oil splatter that creates both a fire hazard and an accelerated cleaning burden. The fryer splash guard is a straightforward solution to both problems.
This 18 gauge stainless steel splash guard, 20-1/2"D x 18"H, creates a physical barrier on the 1/2"-thick fryer wall side of the fryer station. It redirects oil splatter back toward the fryer rather than allowing it to reach adjacent equipment, walls, or staff working alongside the fryer. It installs on either the left or right side, making it compatible with any station layout.
Universal sizing is designed to fit most commercial floor fryers without modification. The stainless steel construction stands up to the high temperatures and aggressive cleaning chemicals used in fryer station maintenance, and it won't corrode or degrade in the oil-heavy environment of daily fryer operation.
Splash guards are not required by code in all jurisdictions, but they are increasingly expected in commercial kitchen design — both for the fire safety benefit of containing oil splatter and for the equipment protection benefit of keeping adjacent appliances cleaner. An easy installation that has meaningful impact on station safety and maintenance.
WARNING - CA Prop 65 | Product Width (in) | 18 |
|---|---|
| Product Height (in) | 20.5 |
| NSF Listed | No |
| Manufacturer | Krowne |
| MPN | 30-324 |
| SKU | 9N074 |
