Krowne 28-201S Stainless Steel Front Casters Positioning Set
Krowne Stainless Steel Front Caster Positioning Set | Set of 2
Product Features:
- Stainless steel construction
- Set includes (2) chocks, (8) hex screws, (8) drop-in anchors
- Works with 28-200 rear caster chocks
- Satisfies NFPA Codes 17A (5.6.4) and 96 (12.1.2.3)
- Creates defined home position for caster-mounted equipment
- Suitable for all caster-mounted kitchen equipment
- Dimensions: 9"L x 4"W x 5/8"H
- Easy installation
The Krowne 28-201S Stainless Steel Front Caster Positioning Chock Set is a stainless steel front caster positioning chock set designed to create a defined home position for caster-mounted commercial kitchen equipment. Working alongside the 28-200 rear chock, it ensures equipment is always returned to the correct position relative to fire suppression and ventilation systems. Satisfies NFPA Codes 17A (5.6.4) and 96 (12.1.2.3). Set includes (2) chocks, (8) hex screws, and (8) drop-in anchors.
Made of heavy-duty stainless steel and easy to install, these chocks are a code-compliant solution for any commercial kitchen where caster-mounted equipment requires a defined return position after cleaning or maintenance.
The Krowne 28-201S Stainless Steel Front Caster Positioning Chock Set is a code-compliant front caster positioning chock set designed to establish and enforce a defined home position for caster-mounted commercial kitchen equipment. Working in conjunction with the Krowne 28-200 rear caster chocks, it ensures that equipment is always returned to the correct position — in proper relation to fire suppression systems and ventilation hoods — after being moved for cleaning or maintenance.
This is not simply a convenience accessory — caster chocks are required by NFPA Codes 17A (5.6.4) and 96 (12.1.2.3) in many jurisdictions. Using these chocks helps commercial kitchen operators satisfy those code requirements and pass health and fire safety inspections.
Installation is straightforward: the drop-in anchors are set into the floor at the equipment's correct home position, and the chocks are fastened with the included hex screws. Once installed, the chocks physically stop the equipment casters at the exact required position every time the equipment is returned after cleaning.
Made of heavy-duty stainless steel construction, these chocks are built to withstand daily contact with casters, floor cleaning, and the general demands of a commercial kitchen floor environment without corroding or degrading.
Each set includes (2) stainless steel chocks, (8) hex screws, and (8) drop-in anchors. Dimensions: 9"L x 4"W x 5/8"H. Compatible with all caster-mounted commercial kitchen equipment.
WARNING - CA Prop 65 | Standard Warranty | Lifetime |
|---|---|
| Manufacturer | Krowne |
| MPN | 28-201 |
| SKU | 9N018 |
