Special Offer | 600' Run 3 Pump Glycol Beer Chiller System 1 HP 28 Gallon Tank

This item is has been discontinued
SKU
33-3K473

600' Run, 3 Pump Long Draw Draft Beer Glycol Chiller 28 Gallon 1 HP

This large powerful Glycol power pack chiller will cool a total of up to 600' of trunk line. With it's 3 pumps, a storage tank capacity of 28 gallons for glycol and a heavy duty 1 HP motor, this glycol chiller could accommodate three trunk lines. The unit is equipped with a digital thermostat for temperature assurance. 

Note: This is a Special Offer item, no backorders.

600 Foot, 3 Pump Power Pack Beer Chiller 28 Gallon Tank Capacity 1 HP (Air Cooled)

The glycol chiller can accommodate a total cooler to faucet run of 600 feet. It features a heavy duty 1 HP compressor and has 3 pumps allowing you to push glycol through 3 separate trunk lines. The large 28 gallon glycol tank capacity will keep your product cold from cooler to faucet. If you are unsure what a glycol system is or are currently using an inefficient forced-air system, this information is very important. Glycol chillers have the amazing advantage of extending the distance from the keg and the beer tap to a greater distance than that of a forced-air system. All of the beer lines and the glycol solution lines are put next to each other in an insulated foam tube so that the chilled glycol product from the chilling system keeps the beer cold during the beverage trip from cooler to faucet.

The BVL CWA-100/3 Glycol Beer Cooling System

This BVL Glycol Chiller can handle up to 3 trunk lines with mulitple beer lines. The 28 gallon tank along with the powerful 1 HP motor has enough cooling power to support cooling product line for up to 600 feet total from your cooler location to your faucet location, keeping it cold all the way. Remember to consider that trunk line with 10 products or more have 2 outgoing and 2 retun glycol lines, thus doubling the length of line to figure into our setup.

One of the best ways to keep brewery, restaurant and bar customers and consumers happy is to serve them the highest quality product possible. Glycol systems were designed mainly for this purpose. The taste of beer can be easily ruined if it warms up as it travels through the keg line, even going so far as to affect your business. Keeping the beer at a regulated temperature with the glycol chilling system is enhanced with the added digital thermostat to ensure that your beer is at the temperature of the highest quality.

Features of 3 Pump Glycol Beer Chiller CWA-100/3

  • 28 gallon Tank Capacity of glycol solution (mix 70% water, 30% glycol), 1 HP
  • 600 Foot Line Run
  • 8530 BTU, 208/230V
  • 21-1/2"W x 32-1/2"D x 34"H
  • Voltage 208 / 230 9.3 Amp
  • Air Cooled.
  • Refrigerant R-404a
  • Charge 5 Lb.
  • Foam Insulation 1"
  • Weight 277 Lbs.
  • Pressure Approximate: 55 low / 255 High
  • Pump Gravity Feed 140 GPH

Warranty for BVL CWA-100/3 Glycol Beer Chiller

1 year parts and labor

More Information
Manufacturer Rapids
MPN CWA-100/3
SKU 33-3K473
WARNING California Prop 65
This product can expose you to chemicals including Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Write Your Own Review
You're reviewing:Special Offer | 600' Run 3 Pump Glycol Beer Chiller System 1 HP 28 Gallon Tank
Your Rating

Related products

Check items to add to the cart or
We found other products you might like!
  1. 350' Run Glycol beer line chiller with circulation pump
  2. 250' Run Glycol chiller with 2 pumps and 1/2 HP refrigeration
  3. 350' Run 2 Pump Glycol Beer Chiller for long draw beer systems
  4. 250' Run Glycol beer line chiller with 1/2 HP motor & 12 Gallon capacity
  5. 125' Run Glycoll chiller system