True TDD-2-S-HC 2-Tap 2-Keg Stainless Beer Dispenser | 59" Kegerator

$4,523.33
SKU
5T731SS

2-Tower 59" Direct Draw Beer Dispenser | (2) 1/2 Barrel Keg Capacity | Stainless Steel | True TDD-2-S

This two-tap draught kegerator uses oversized refrigeration components to hold temperature between 33 to 38 degrees Fahrenheit.

58-7/8"W x 28-1/8"D x 37"H, 330 lbs

1/3 HP, 115v/60/1, 9.1 amps, NEMA 5-15P

Find more True beer dispensers/kegerators or check out all brands of beer dispensers/kegerators.

59" 2-Keg Stainless Steel Kegerator | 2 Towers | True TDD-2-S

You know what makes more of a statement to your customers than a stainless steel beer dispenser? A stainless steel beer dispenser that gets them a crisp, cold cup for beer every time. Choose this solid swing door stainless steel direct draw beer dispenser and you can make that statement.

Beneficial Design Features of the True TDD-2-S Stainless Keg Cooler

  • Holds temperature between 33 degrees Fahrenheit to 38 degrees Fahrenheit using oversized refrigeration system
  • Stainless steel exterior (doors, front, counter top, and sides). Matching aluminum back
  • Stainless steel interior with 1/2" reinforced floor lip and heavy gauge galvanized steel walls
  • NSF-7 approved for packaged and bottled product
  • Cold air is funneled into the two 3" diameter stainless steel insulated beer columns to reduce foaming and keep beer cold all the way to the glass
  • Foamed-in-place Ecomate polyurethane insulation has zero ozone depletion and global warming potential
  • 5 years parts/labor, 7 years compressor warranty

Rapids Beer Tips

To ensure your Beer Dispenser is ready to go right out of the box, Rapids suggests you purchase either a Deluxe Tapping Kit (containing a CO2 kit, a cleaning kit, and a tapping kit), OR a simple CO2 Kit, depending on your needs.

Need More Beer?

To dispense even more than the factory-default number of beers at one time, you will need a few other items as well:

  • Extra CO2 hose (4 ft per each new keg is recommended) and 2 clamps for each new hose
  • Beer line, hex nuts, and washers to attach your keg to the dispenser
  • Additional coupler so you can hook up your CO2 line and beer line to the keg completes the setup.

To add an additional faucet to your existing draft arms:

  • Depending on whether you want to add one offset, one inline, or two additional products, different kits are required. Each kit contains a sleeve, insulation, 3 set screws, and shank(s)
  • For each product you are adding, a faucet will be needed
  • The coupler, CO2 hose, clamps, etc. will be required here as well, as you are still adding additional kegs.
More Information
Beer Dispenser Regular Top
Number of Doors 2
Exterior Stainless Steel
Energy Star No
Manufacturer True
MPN TDD-2-S-HC
SKU 5T731SS
WARNING California Prop 65
This product can expose you to chemicals including Di-(2-Ethylhexy) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to P65Warnings.gov
Write Your Own Review
You're reviewing:True TDD-2-S-HC 2-Tap 2-Keg Stainless Beer Dispenser | 59" Kegerator
Your Rating
Blog Posts (2)

Related products

Check items to add to the cart or

You may also be interested in...