79" Black Vinyl 4-Keg 2-Tap Beer Dispenser | Beverage Air DD78HC-1-B

Beverage Air DD78HC-1-B 79" 4-Keg Draft Beer Kegerator/Beer Dispenser | Black Vinyl Exterior | 2 Towers

It takes more than a good brew to make and keep a customer - the way you pour it (and at what temperature) can have a big effect as well. Make sure your beer dispenser will keep customers coming back for more with a kegerator from Beverage Air. This 34.2 cu.ft. keg cooler has an exterior made from heavy-duty black vinyl (cleans well and hides smudges) and an interior with galvanized steel walls and ceiling with reinforced floors and door sills.

Advantages of the Beverage Air DD78HC-1-B Black Vinyl Direct Draw Beer Cooler

• 3-in-1 Draft Solution uses a single stainless-steel tap to serve different beverages, such as wine, beer, and coffee (or other non-alcoholic beverages) through silver-lined tubing that is 100% effective against the top 4 beverage spoiling bacteria
• The ambient class-certification of 100 degrees Fahrenheit makes it suitable for the majority of hot locations
• Money-saving, environmentally-friendly features - foamed-in-place polyurethane and R290 hydrocarbon refrigerant increase the energy efficiency of the unit, which lowers your energy bill!
• Self-contained, forced air refrigeration (including a continuous supply of cold air in the two 3" tap towers) is used to ensure your beer is dispensed at the perfect temperature
• The self-closing doors (that include key locks) help keep your product secure. Magnetic gaskets help provide positive door sealing
• The drain tube located at the bottom front of the cooler can easily be connected to the floor drain
• Stainless steel top makes cleaning simple
• Includes an 8' long cord and plug set

Eliminate Worry with the Beverage Air DD78HC-1-B Beer Dispenser Warranty

• Parts and Labor: Three Years
• Compressor: Seven Years

Rapids Beer Tips

To ensure your Beer Dispenser is ready to go right out of the box, Rapids suggests you purchase either a Deluxe Tapping Kit (containing a CO2 kit, a cleaning kit, and a tapping kit), OR a simple CO2 Kit, depending on your needs.

Need More Beer?

To dispense even more than the factory-default number of beers at one time, you will need a few other items as well:

• Extra CO2 hose (4 ft per each new keg is recommended) and 2 clamps for each new hose
• Beer line, hex nuts, and washers to attach your keg to the dispenser
• Additional coupler so you can hook up your CO2 line and beer line to the keg completes the setup.

To add an additional faucet to your existing draft arms:

• Depending on whether you want to add one offset, one inline, or two additional products, different kits are required. Each kit contains a sleeve, insulation, 3 set screws, and shank(s)
• For each product you are adding, a faucet will be needed
• The coupler, CO2 hose, clamps, etc. will be required here as well, as you are still adding additional kegs.

Find more Beverage Air beer dispensers/kegerators or check out all brands of beer dispensers/kegerators.