51" 2-Keg Beer Dispenser | 2-Tap | Black Vinyl | Beverage Air DD50HC-1-B

$4,581.26
SKU
6B201

Black Vinyl 51" 2-Keg Kegerator | 1 Dual Faucet | Beverage Air DD50HC-1-B

Make the most of your space by choosing this 2-keg, 2-tap direct draw beer dispenser from Beverage Air. It allows you to tap both of your stored kegs at once for your convenience. FYI: Keg capacities based on straight wall kegs.

Dimensions: 50-1/2"W x 29"D x 52-1/2"H, 314 lbs

Additional Info: 1/4 HP, 2.5 amps, 115V

Find more Beverage Air beer dispensers/kegerators or check out all brands of beer dispensers/kegerators.

Beverage Air DD50HC-1-B 51" Draft Beer Kegerator | 2-Keg Beer Dispenser with 1 Dual Faucet Tap Tower

This beer dispenser comes with everything you need to make beer dispensing simple and successful. The 3" dia. insulated towers have a continuous source of cold air to keep the beer cold right to the tap, a handy drain tube is included that can be connected to the floor drain, and the cabinet has been tested and certified to the ambient class of 100 degrees Fahrenheit (meaning it is great for hot locations!).

It maintaines product temperatures between 36 and 38 degrees Fahrenheit.

Features of the Beverage Air DD50HC-1-B Keg Cooler

  • 3-in-1 Draft Solution uses a single stainless-steel tap to serve different beverages, such as wine, beer, and coffee (or other non-alcoholic beverages) through silver-lined tubing that is 100% effective against the top 4 beverage spoiling bacteria
  • CFC- and HCFC-free foamed-in-place polyurethane insulation
  • Interior: Galvanized steel walls/ceiling, reinforced floor and door sill
  • Exterior: Wear-resistant black vinyl and stainless steel top (including drip tray)
  • Self-closing doors with key locks and positive door sealing
  • R290 hydrocarbon refrigerant is environmentally-friendly and will reduce your energy bill
  • 7 year parts and labor warranty, 5 year compressor
  • Ships from IA, PA

Rapids Beer Tips

To ensure your Beer Dispenser is ready to go right out of the box, Rapids suggests you purchase either a Deluxe Tapping Kit (containing a CO2 kit, a cleaning kit, and a tapping kit), OR a simple CO2 Kit, depending on your needs.

Need More Beer?

To dispense even more than the factory-default number of beers at one time, you will need a few other items as well:

  • Extra CO2 hose (4 ft per each new keg is recommended) and 2 clamps for each new hose
  • Beer line, hex nuts, and washers to attach your keg to the dispenser
  • Additional coupler so you can hook up your CO2 line and beer line to the keg completes the setup.

To add an additional faucet to your existing draft arms:

  • Depending on whether you want to add one offset, one inline, or two additional products, different kits are required. Each kit contains a sleeve, insulation, 3 set screws, and shank(s)
  • For each product you are adding, a faucet will be needed
  • The coupler, CO2 hose, clamps, etc. will be required here as well, as you are still adding additional kegs.

 

More Information
Beer Dispenser Regular Top
Number of Doors 2
Exterior Black Vinyl
Energy Star No
Manufacturer Beverage Air
MPN DD50HC-1-B
SKU 6B201
WARNING California Prop 65
This product can expose you to chemicals including Lead & Lead Compounds, which are known to the State of California to causecancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Write Your Own Review
You're reviewing:51" 2-Keg Beer Dispenser | 2-Tap | Black Vinyl | Beverage Air DD50HC-1-B
Your Rating

Related products

Check items to add to the cart or

You may also be interested in...