CO2 Tank & Dual Gauge Regulator Kit

Rating:
80%
$145.82
In Stock | Rapid Ship
SKU
BD435

Rapids Beer Dispenser CO2 Kit | Dual Gauge Regulator, CO2 Cylinder

This kit combines the necessary components to complete the pressurization of a keg dispenser or kegerator. CO2 kit comes with a 5 lb. CO2 cylinder, Dual gauge CO2 regulator, 4 ft CO2 hose and clamps. 12 lbs.

Rapids Beer Dispenser CO2 Kit with Dual Gauge CO2 Regulator and 5 lb. CO2 Cylinder

Looking for the CO2 components needed to complete the installation of your keg box, jockey box, beer dispenser or kegerator? Look no further. Rapids wholesale has assembled this CO2 kit for a convenient one stop shop. The standard CO2 kit contains a 5 pound aluminum CO2 cylinder to which attaches a dual gauge CO2 regulator.. One of the gauges on the regulator will provide you with information on how much CO2 remains within the cylinder. It has markings that will indicate at which point you should consider recharging the tank. The second gauge on the regulator provides information on the amount of pressure currently being applied to the system. The pressure can be adjusted with the adjustment screw until you find that perfectly balanced pour. In addition, a 4 foot length of vinyl tubing is included with clamps that you can use to attach the CO2 system to your beer dispensing system.

Basic Setup of the Rapids Beer Dispenser CO2 Kit

After the CO2 cylinder is charged, the dual gauge CO2 regulator will need to be attached directly to the cylinder. On the bottom of the regulator, below the gauges there is a nozzle to which the CO2 hose is fitted and secured with a hose clamp. The other end of the CO2 line will then be joined and fastened with the other clamp to beer coupler of your beer dispensing system. The cylinder and regulator are small enough in size to tuck in the corner of most beer dispensers and kegerators. These kits can also be used in portable setups as well. They are the perfect match for use with jockey boxes, or picnic coolers for event setups. Add a CO2 add on line kit if you are supporting multiple faucets. We offer sankey coupler kits to connect the other end to your kegs.

Rapids Beer Dispenser CO2 Kit Components

These items are included in the kit:

  • One (1) 4' CO2 Line Hose
  • Two (2) Fasteners (1 for each end of CO2 Line Hose)
  • One (1) Dual Gauge CO2 Regulator
  • One (1) CO2 Cylinder

Rapids CO2 Kit Shipping Information

The CO2 kits weigh 12 lbs. and ship from Iowa. (CO2 cylinder is shipped empty)

CO2 Cylinders must be shipped GROUND

Kegerator Conversion Video

This video features the Deluxe Conversion Kit.

More Information
Manufacturer Rapids
MPN BD-435
SKU BD435
WARNING California Prop 65
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Write Your Own Review
You're reviewing:CO2 Tank & Dual Gauge Regulator Kit
Your Rating

Related Products

You may also be interested in...